The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the rivets (inserted from top to bottom) that secure the top of the bumper and the trim.
-take out the rivets (inserted from bottom to top) along the perimeter of the lower part of the bumper, which secure the wheel arch liners and protection.
-turn the wheels to the side.
-in the wheel arches, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
-in the opening of the trunk, unscrew two screws on each side and remove the taillights (they are held by the latches).
-under the rear lights, unscrew one screw and take out one piston on each side.
-take out the rivets that secure the bottom of the bumper (inserted from bottom to top).
-in the wheel arches, unscrew the screws (so as not to remove the wheels, take the ratchet with a nozzle) that secure the wheel arch liners (rear part).
-Unscrew one screw on each side that secure the sides of the bumper to the fenders (twisted from bottom to top).
-we climb under the bumper and unscrew the bolts that attach the metal amplifier to the body.
-release the latches in the wings (pull the corners towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
