Lancia Thema II (2011-2014)
Front bumper
-open the hood.
-under the hood take out eight caps that secure the upper part of the bumper.
-around the perimeter of the lower part of the bumper take out the caps that secure the engine protection.
-turn the wheels to the side.
-in the wheel wells take out three pistons on each side that secure the fender liner (front).
-for the fender liner, unscrew one screw on each side that attach the corners of the bumper to the wings.
-release the latches under the hood (pull up) and in the wings (pull towards you), indicated in the diagram with blue arrows.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-wheel arches take out four pistons on each side that secure the fender liner (rear).
-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-unscrew the six screws from the bottom.
-we release the latch in the wings.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.