How to remove the front and rear bumper Isuzu D-Max (2012-2020)

Isuzu D-Max II (2012-2020)

Depending on the year of manufacture, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood, unscrew the screws, release from the latches and remove the grille.

-under the grille, unscrew the four screws that secure the upper part of the bumper to the amplifier.

-on the perimeter of the lower part, unscrew the screws (spun up).

-turn the wheels to the side.

-in the wheel arches, we release the fender liner (front).

-for the fender liner, unscrew one screw on each side (spun up) that secure the corners of the front bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

Rear bumper

-from the side of the bottom, disconnect the connectors of the electrical equipment.

-from the back of the bumper, unscrew the four bolts securing the brackets to the body.

-with an assistant, pull the rear bumper back.

How to remove the front and rear bumper Isuzu D-Max (2002-2012)