BMW X3 II (F25) (2010-2017)

The attachment points may differ slightly depending on the year of manufacture.

Front bumper

-open the hood.

-under the hood, remove the rubber seal.

-unscrew the six screws (twisted from top to bottom), which are the top of the bumper.

-from the bottom, unscrew the screws (twisted from bottom to top) that secure the lower part of the bumper.

-wheel the wheels to the side.

-take out the caps and release the fenders from the bumper (they are held on the latches, pull towards ourselves).

-in the wheel arches, unscrew the screws that secure the wheel arch liners (front part).

-unscrew two screws and take out one piston on each side, which attach the sides of the bumper to the fenders.

-release the clips in the wings (pull the corners of the bumper down and towards ourselves).

-with an assistant, gently pull the bumper forward (look behind the wires and hoses).

-disconnect the connectors of the electrical equipment.

- (if any) disconnect the headlight washer hoses (liquid may leak).

front bumper attachment points BMW X3 F25

BMW X3 F25 Front Bumper Mounting Diagram

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-remove the lining near the taillights (held by the latches).

-unscrew two nuts on each side and remove the taillights (held by latches).

-under the rear lights, unscrew one screw on each side (twisted from top to bottom).

-take out the reflectors from the bumper (they are held by the latches) and unscrew one screw under them on each side.

-from the bottom side, unscrew the eleven screws (twisted from bottom to top) that secure the bottom of the bumper.

-in the wheel arches, take out three pistons on each side and release the fender liners from the bumper (hold on to the latches, pull towards ourselves).

-under the pads, unscrew two screws on each side that secure the sides of the bumper.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches under the rear lights.

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

mounting points for the rear bumper BMW X3 F25

BMW X3 F25 Rear Bumper Mounting Diagram

 

How to remove front and rear bumper BMW X3 (E83)

How to remove front and rear bumper BMW X3 G01