How to remove front and rear bumper Jaguar XE

Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-under the hood, Unscrew the eight screws and take out one of the clips that secure the upper part.

-around the bottom part Unscrew ten screws (spun up) that secure the protection (can be unscrewed far the screws and remove the bumper with the cover).

-wrenched the wheel to the side.

-wheel arches Unscrew four screws on each side and removed the wheel arches (the front part).

-for wheel arch liners Unscrew three screws on each side holding the corners of the bumper to the wings (two screws twisted upwards and one slightly below and inside).

-we release the latch in the wings.

-with the assistant pulls the bumper forward (look for wires and hoses).

-snap together the connectors of electrical equipment.

-if you have headlight washers, disconnected the hoses.

Rear bumper

-open the trunk lid.

-Unscrew the screws in the opening of the trunk.

-Unscrew the two screws at the bottom (spun up).

-in the wheel wells, Unscrew the screws holding the wheel arch liners and the bumper to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of the equipment (if any).