How to remove front and rear bumper Jeep Compass (2007-2017)

Depending on the year of release of the attachment can vary.

Front bumper

-wrenched the wheel depending on which side we understand.

-wheel arches Unscrew three screws on each side holding the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings and weaken the clamps.

-Unscrew the screws (spun up) that secure the lower part.

-under the hood, Unscrew the screws and take out the caps that secure the top bumper.

-with the assistant pulls the bumper forward (don't want to break the wires).

-snap together the connectors of electrical equipment.

Rear bumper

-under the car and take out the four clips that secure the lower part.

-wheel arches Unscrew three screws on each side holding the fender liner.

-for wheel arch liners Unscrew one screw and relax on the two catches on each side.

-open the trunk lid.

-in the opening of the trunk, Unscrew the five screws.

-with the assistant pulls the back bumper (don't want to break the wires).

-snap together the connectors of the sensors (if any).