How to remove front and rear bumper Jeep Patriot

Depending on the year of release of the attachment can vary.

Front bumper

-wrenched the wheel, depending on which side we understand.

-wheel arches Unscrew three screws on each side holding the fender liner to the bumper.

-attach the fender liner to the side and Unscrew the screws (spun upwards) holding the corners to the wings.

-take out the caps (inserted from the bottom up) that secure the lower part of the bumper.

-open the hood.

-under the hood, Unscrew the screws and take out the rivets that secure the upper part.

-with the assistant pulls the bumper with the clips in the wings forward (pay attention to wire).

-remove connectors from electrical equipment.

Rear bumper

-open the trunk lid.

-in the opening of the trunk pulls out five caps.

-wheel arches Unscrew three screws on each side holding the fender liner to the bumper.

-drawn wheel arches to the side and Unscrew the screws that attach the angles to the wings.

-around the bottom part Unscrew the four screws.

-with the assistant pulls the bumper back with the clips (don't want to break the wires).

-snap together the connectors of the equipment (if any).