How to remove the front and rear bumper Lincoln LS

Depending on the year of manufacture, the mounting points may differ.

Front bumper

-open the hood.

-remove the headlights.

-from the bottom side, we Unscrew the screws that fasten the engine protection and underwing plates.

-in the wheel arches, we Unscrew the screws that fasten the undercarriage (the front part).

-behind the slats, we Unscrew two screws on each side, which attach the corners of the bumper to the fenders.

-with an assistant, we pull the bumper forward (look for the wires).

-remove the connectors from the fog lights, turn indicators and temperature sensor.

Rear bumper

-open the trunk lid.

-in the trunk, remove the rear trim and release the side trim.

-behind the panels, we Unscrew six nuts in the rear panel and two nuts on each side in the inner part of the wings.

-from the bottom side, we Unscrew the screws (screwed from the bottom up) that fasten the lower part.

-in the wheel arches, we Unscrew the screws and release the undercarriage (the rear part).

-behind the wing flaps, we Unscrew one screw on each side, which attaches the corners to the wings.

-with an assistant, we separate the corners of the bumper to the sides and pull the bumper back (look for the wires).

- disconnect the Parking meter connectors (if present).