Front bumper
-open the hood.
-under the hood we take out the pistons, release them from the clamps and remove the radiator grille.
-under the grille we take out three pistons that secure the upper part of the front bumper.
-from the bottom, unscrew the screws that secure the lower part.
-turn the wheels to the side.
-in the wheel arches we release the fender liners (front part).
-move the fender liners to the side and unscrew two screws on each side (twisted from bottom to top) that secure the sides to the wings.
-release the latches under the headlights.
-with an assistant, carefully pull the bumper forward (watch the wires).
-remove the connectors of the electrical equipment.
Rear bumper
-open the trunk lid.
-in the trunk we release the side trims.
-behind the casings, unscrew the nuts and remove the rear lights.
-under the rear lights, take out one piston on each side that secures the upper part of the rear bumper.
-from the bottom, unscrew the two screws and take out the two pistons that secure the lower part.
-in the inside of the wings, unscrew two screws on each side that secure the sides to the wings.
-we release the clamps in the wings.
-release the latches in the trunk opening.
-with an assistant, pull the bumper back (watch the wires).
-disconnect the connectors of the electrical equipment (if any).