Infiniti QX56 I JA60 (2004-2010) bumper removal.

Front bumper

-open the hood.

-under the hood we take out six pistons (inserted from top to bottom) and three pistons (inserted from bottom to top), which secure the bumper to the metal strip.

-from the bottom we take out two pistons (inserted from bottom to top), which secure the lower part to the protection of the engine compartment.

-turn the wheels depending on which side we will disassemble.

-in the wheel arches, unscrew two screws on each side that secure the fender liners (front part) to the sides of the bumper.

-behind the fender liners, unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.

-release the latches under the headlights (pull towards yourself).

-with an assistant, carefully pull the bumper forward (make sure not to break the wires).

-we release the connectors of the fog lights and other electrical equipment.

Rear bumper

-open the trunk lid.

-in the trunk opening, unscrew two screws on each side, release them from the fasteners and remove the rear lights.

-under the rear lights, unscrew one screw on each side (twisted from top to bottom).

-from the bottom side, unscrew the four screws.

-in the trunk we release the side trims.

-in the inner part of the wings, release three latches on each side (you need to turn ¼ turn).

-with an assistant, release it from the latches and pull the rear bumper back (be careful not to break the wires).

-disconnect the connectors of the electrical equipment.

How to remove front and rear bumper Infiniti QX56 / QX80 (2010-2023)