How to remove front and rear bumper Audi A8 (1994-2002)
Audi A8 I D2 (1994-2002)
Front bumper
-In the lower part of the bumper on the edges unscrew one screw and remove a decorative lattice.
-under the bars unscrew one bolt on each side (under the internal star or hexagon), that are swirling up from the bottom and attach aluminum amplifier bumper to the body.
-unscrew the wheel to the left or right side depending on which side of the bumper will loosen first.
-unscrew the screws that attach the fender liner to the bumper.
-pulls the bumper itself.
-now disconnect the connectors from the fog lights (if any).
-if you have headlight washers you need to disconnect the hose from the tee and plug cap to the reservoir was leaking fluid.
The bumper rests on two bolts plus the guides and removed very simply.
-on the edge of the bumper, unscrew the two bolts floor inner hexagon or an asterisk (spun from the bottom upward), for convenience, you can remove the bottom skirt.
-pulls the bumper from the guides themselves.
-if you have sensors, remove the connectors from the sensors.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
