How to remove front and rear bumper Toyota Venza (2020+)

Toyota Venza XU80 (2020+)

Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood, unscrew the five screws and take out the two pistons that secure the upper part of the bumper.

-on the perimeter of the lower part, Unscrew the seven screws and take out two pistons (twisted and inserted from the bottom up).

-turn the wheels to the side.

-in the wheel arches, we take out the caps and release the clips that secure the fender liner (front) and bumper corners.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

front bumper attachment points Toyota Venza XU80 (2020+)

Front bumper mounting scheme Toyota Venza XU80 (2020+)

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-remove the pads near the rear lights (hold on latches).

-in the opening of the trunk, Unscrew the four screws.

-in the wheel wells take out the caps that attach the fender liner (rear) and the corners of the bumper to the wings.

-at the bottom of the bumper take out six caps (inserted from the bottom up).

-we release the latch in the wings (pull the corners of the bumper towards you) and under the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

rear bumper attachment points Toyota Venza XU80 (2020+)

Rear bumper mounting scheme Toyota Venza XU80 (2020+)

 

How to remove front and rear bumper Toyota Venza (2008-2017)