How to remove front and rear bumper Renault Captur (Kaptur)

Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-under the hood, Unscrew the four screws and take out the two clips that secure the trim over the grille.

-we release the latch of the hood.

-depending on which side we will disassemble, wrenched the wheel.

-free lining of the wings (hold the latches starting from the bottom, pull towards you).

-wheel arches take out the rivets and removed the arch liners (no need to remove).

-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.

-around the bottom part Unscrew the seven screws (spun up).

-we release the latch in the wings (pull the corners themselves).

-pulls the bumper forward (don't want to break the wires).

-remove the connectors from the equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew three screws on each side (attach the Central part of the bumper that is) and take out a rear lights (sitting tight).

-free lining of the wings (hold the latches starting from the bottom, pull towards you).

-wheel arches Unscrew one screw on each side holding the bumper corners to the wings.

-Unscrew the eight screws that secure the lower part.

-we release the latch in the wings (pull the corners themselves).

-pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.